Instruction manual

Section 3: Configuration and Operation
TH2 Series Operator Manual Page 3-51
3.7 PRINTER SETUP MENU (Cont’d)
Menu Description
The PITCH enables fine tuning of the formats vertical position on the media.
The value can be expressed in inches, millimeters or dots depending on selec-
tion in UNIT menu.
Displays the Pitch range and input field with existing Pitch value and its unit.
Enables input of new Pitch value.
Setting range is between 0 and 80, and the default value is 0 dot.
Note:
If the value is outside the allowed range, Invalid will be displayed.
If the value is acceptable, Saved will be displayed when enter button is
pressed.
The OFFSET enables fine tuning of the pre-defined media stop positions.
The value can be expressed in inches, millimeters or dots depending on selec-
tion in UNIT menu.
Displays the Offset range and input field with existing Offset value and its unit.
Enables input of new Offset value.
Setting range is between -24 and 24, and the default value is 0 dot.
Notes:
• If the value is outside the allowed range, Invalid will be displayed.
• When adjusting the Offset value, the first following format will be printed on a
faulty position since a “new” print position is printed on an “old” stop position.
Next prints will be correct.
If the value is acceptable, Saved will be displayed when enter button is
pressed.
IMAGE menu.
IMAGE handles the formats positioning and appearance on the media.
Enables the selection of 1.Offset, 2.Rotation or 3.Mirror.
OFFSET menu.
OFFSET enables fine tuning of formats.on the media.
Enables the selection of 1.Vertica or 2.Horizontal.