Instruction manual

Section 3: Configuration and Operation
Page 3-44 TH2 Series Operator Manual
3.7 PRINTER SETUP MENU (Cont’d)
Menu Description
Printer SETUP menu.
Enables the selection of 1.Profile, 2.Media, 3.Print Ctrl, System, Regional or
6.Network
Select 2.Media for series of media settings.
MEDIA menu.
Enables the selection of 1.Size, 2.Sensor Type, 3.Calibrate or 4.Max feed.
Select 1.Size to set media size.
Enables selection of 1.Length or 2.Width from media SIZE menu.
The value can be expressed in inches, millimeters or dots depending on selec-
tion in UNIT menu.
Default unit is in dot.
Displays the media length range and input field with existing media length and
its unit.
Enables input of new media length.
Note:
If the value is outside the allowed range, Invalid will be displayed.
If the value is acceptable, Saved will be displayed when enter button is
pressed.
Displays the media width range and input field with existing media width and its
unit.
Enables input of new media width.
Note:
If the value is outside the allowed range, Invalid will be displayed.
If the value is acceptable, Saved will be displayed when enter button is
pressed.
MEDIA menu.
Enables the selection of 1.Size, 2.Sensor Type, 3.Calibrate or 4.Max feed.
Select 2.Sensor Type to set media sensor.
Displays existing SENSOR TYPE selection and enables new selection.
The default is set at 2.I-Mark
The “pressed radio button” indicates the current selection until the new selec-
tion is chosen and enter button is pressed.
When selecting 3.None, the label length will be equal to the length of the printed
format.
When selecting 4.Fix, the label length will be equal to the media set up length
+2 mm even if the format is shorter.
Note:
The view of the sensor type menu is depended of the Media Handling selection.