Instruction manual

Section 3: Configuration and Operation

TH2 Series Operator Manual Page 3-39

3.6 APPLICATION MENU (Cont’d)

3.6.13 To set the PRINT menu appearance

You can set the appearance of PRINT menu in 2.Mode selection of APPLICATION menu. Format, Table or

On-line options can be set to displayed or not to appear in PRINT menu. The following flow summarizes the

sequence of setting the MODE menu.

Menu Description

Displays F1 Setup/ menu and enables selection of pre-defined shortcuts to

printer set up menu by F1 button.

Toggle your selection(s) by pressing associated numbered button(s), or select

by using the , arrow buttons and toggle with enter button.

Note: All selections can be set at the same time.

Press Menu/page-up button to return to F1 menu.

Menu Description

Enables selection of print mode.

Toggle your selection(s) by pressing associated numbered button(s), or select

by using the , arrow buttons and toggle with enter button.

Notes: All selections can be set at the same time and are selected as default.

If nothing else is selected, 1.Format is automatically selected.

MODE setting

The appearance of

PRINT menu based on

the MODE settings.

SETTINGS

Select 1.Application

Select 2.Mode

Press to return to

APPLICATION menu

Press the associated

numeric button to toggle

your selection(s), or

select by using /

arrow buttons and toggle

with button.