Instruction manual

Section 3: Configuration and Operation
Page 3-38 TH2 Series Operator Manual
3.6 APPLICATION MENU (Cont’d)
3.6.12 To edit the F1 menu
The selection of pre-defined functions that appear in F1 menu can be set to displayed or not to. The following
flow summarizes the sequence of setting the F1 menu.
Menu Description
If 1.Cancel is selected, the table will not be deleted. The table list will be dis-
played.
Select 2.Yes to delete.
A rotating time-glass icon is visible in the upper right corner while printer is busy
deleting your table.
If 2.Yes is selected and confirmed, the selected table 10.Shoe table (in this
example) will be deleted from table list.
*The contents of the display vary depending on the pre-loaded tables.
Menu Description
Displays F1 menu and enables selection of pre-defined functions linked to F1
button.
Toggle your selection(s) by pressing associated numbered button(s), or select
by using the , arrow buttons and toggle with enter button.
Notes: All selections can be set at the same time.
6.Setup/ can only be selected if one or more sub-menus are selected.
Application EDIT menu
Press the associated
numeric button to toggle
your selection(s), or
select by using /
arrow buttons and toggle
with button.
Select 3.F1
If 6.Setup/ is selected, Setup/
sub-menu is displayed.
Press to return
to F1 menu
Press the associated
numeric button to toggle
your selection(s), or
select by using /
arrow buttons and toggle
with button.
Press to
return to
EDIT menu