Instruction manual

Section 3: Configuration and Operation

TH2 Series Operator Manual Page 3-27

3.6 APPLICATION MENU (Cont’d)

3.6.8 When Image is selected in the FIELDTYPE menu

The following flow summarizes the sequence for defining the field type while editing the field of the format.

Menu Description

Displays input range and input field with default value.

Enables input of box frame thickness.

Note:

If the value is outside the allowed range, Invalid will be displayed.

Enables the selection of anchor point of the box field.

TOP_LEFT, TOP_CENTER, TOP_RIGHT can be selected.

Anchor Point is a field co-ordinate representing the field regarding positioning

and rotation.

FIELDTYPE

Select the source.

Please refer to the flow

of individual selection.

Select

5.Image

Set horizontal

position

Set the vertical

position

Select loaded

image

If 1.FIX is

selected

Set the horizontal

magnification value

Set the vertical

magnification value

Select anchor

point

Proceed to the FIELD

search screen or new

field NAME input

screen depending on

the previous operation.