Instruction manual

Section 3: Configuration and Operation
TH2 Series Operator Manual Page 3-25
3.6 APPLICATION MENU (Cont’d)
3.6.5 When Line is selected in the FIELDTYPE menu
The following flow summarizes the sequence for defining the field type while editing the field of the format.
Menu Description
Displays input range and input field.
Enables input of line horizontal position.
Note:
If the value is outside the allowed range, Invalid will be displayed.
Displays input range and input field.
Enables input of line vertical position.
Note:
If the value is outside the allowed range, Invalid will be displayed.
Displays input range and input field with default value.
Enables input of line horizontal delta.
Note:
If the value is outside the allowed range, Invalid will be displayed.
Displays input range and input field with default value.
Enables input of line vertical delta.
Note:
If the value is outside the allowed range, Invalid will be displayed.
Displays input range and input field with default value.
Enables input of line thickness.
Note:
If the value is outside the allowed range, Invalid will be displayed.
FIELDTYPE
menu
Set line
thickness
Select
3.Line
Set line
vertical delta
Set horizontal
position
Set vertical
position
Set line
horizontal delta
Proceed to the FIELD
search screen or new
field NAME input
screen depending on
the previous operation.