Instruction manual

Section 3: Configuration and Operation
TH2 Series Operator Manual Page 3-23
3.6 APPLICATION MENU (Cont’d)
Menu Description
Displays search field and a list of barcodes available in the printer.
Enables selection of barcodes using input in search field or scrolling with the ,
arrow buttons and enter button.
* Your list of barcodes may be different from this example depending on the
printer firmware version used.
Select the font according to your preference.
Default barcode is Code 39.
Displays input range and input field.
Enables input of barcode horizontal position.
Note:
If the value is outside the allowed range, Invalid will be displayed.
Displays input range and input field.
Enables input of barcode vertical position.
Note:
If the value is outside the allowed range, Invalid will be displayed.
Enables the selection of anchor point of the barcode field.
TOP_LEFT, TOP_CENTER, TOP_RIGHT can be selected.
Enables setting of barcode field direction in 4 angles; 0, 90, 180 or 270 degree.
Displays input range and input field with default height.
Enables input of new barcode height.
Note:
If the value is outside the allowed range, Invalid will be displayed.
Only applicable for:
EAN-8, GS1-128 Composite CC-A/B, GS1-128 Composite CC-C, GS1-128
Interleaved 2 of 5, UPC-A, UPC-E, Bookland, Codabar, Code 128, Code 39,
EAN-13
Enables selection of correction level.
Default selection is 2.Standard
Only applicable for:
Micro QR Code, QR Code