Instruction manual

Section 3: Configuration and Operation
TH2 Series Operator Manual Page 3-21
3.6 APPLICATION MENU (Cont’d)
Menu Description
Displays a list of true type FONT available for the printer.
*Your list of fonts may be different from this example depending on the fonts
downloaded to your printer.
Select the font according to your preference.
Displays input range and input field.
Enables input of text field horizontal position.
Note:
If the value is outside the allowed range, Invalid will be displayed.
Displays input range and input field.
Enables input of text field vertical position.
Note:
If the value is outside the allowed range, Invalid will be displayed.
Displays input range and default field size.
Enables input the size of text field.
Note:
If the value is outside the allowed range, Invalid will be displayed.
Enables the selection of anchor point of the text field.
TOP_LEFT, TOP_CENTER, TOP_RIGHT can be selected.
Displays input range and input field.
Enables setting of text field direction. The direction can be set in 360 steps (0 -
359; describing the degrees of rotation).
Note:
If the value is outside the allowed range, Invalid will be displayed.
Enables selection of SOURCETYPE for the new field.
Fix, Table, Counter, Copy, Script, Time, Input or Select can be selected.
Displays a list of bitmap FONT available for the printer.
* Your list of fonts may be different from this example depending on the fonts
downloaded to your printer.
Select the font according to your preference.
Displays input range and input field.
Enables input of text field horizontal magnification.
Note:
If the value is outside the allowed range, Invalid will be displayed.