Instruction manual

Section 3: Configuration and Operation
Page 3-20 TH2 Series Operator Manual
3.6 APPLICATION MENU (Cont’d)
3.6.3 When Text is selected in the FIELDTYPE menu
The following flow summarizes the sequence for defining the field type while editing the field of the format.
Menu Description
FONTTYPE menu.
Enables selection of true type font or bitmap font from FONTTYPE menu.
FIELDTYPE
menu
Set direction
Select 1.Text
Select 1.truetype
Select the source.
Please refer to the flow
of individual selection.
Select Font
Set horizontal
position
Set the vertical
position
Set the field
size
*
Select 2.bitmap
Set vertical
position
Select Font
Set horizontal
position
Set the
horizontal
magnification
value
Set the vertical
magnification value
Select anchor
point
Set direction
Select anchor
point
Select the source.
Please refer to the flow
of individual selection.
*
*
The details of the screen
may vary depending on
the pre-loaded fonts.