Instruction manual

Section 3: Configuration and Operation
TH2 Series Operator Manual Page 3-17
3.6 APPLICATION MENU (Cont’d)
Menu Description
Enables selection of Modify, New or Delete from FORMAT menu.
Displays a search field and a list of formats to modify or delete.
Enables search for existing format to modify or delete by scrolling with the ,
arrow buttons and enter button or input in search field.
*The contents of the display vary depending on the pre-loaded formats.
Displays input range, existing format LENGTH and unit.
Enables input of new value.
Note:
If the value is outside the allowed range, Invalid will be displayed.
If the input field is left blank or if 0 is input, the value from printer set up will be
used.
Displays input range, existing format WIDTH and unit.
Enables input of new value.
Note:
If the value is outside the allowed range, Invalid will be displayed.
If the input field is left blank or if 0 is input, the value from printer set up will be
used.
FIELD menu.
Enables selection of Modify, New or Delete from FIELD menu.
The next following pages show further explanation on editing the Field.
If Menu/Page up button is pressed on FIELD menu of LENGTH setting
screen, the printer prompts to save the modified or new format.
Selecting 1.Cancel will not save your format.
Selecting 2.Yes will save your format.
A time-glass icon is rotating while printer is saving your work.
Displays input field for new format.
Enables creation of new format, starting with input of format name.
Note:
If the chosen format name already exists, Invalid will be displayed.
The input field is case sensitive.
*The contents of the display vary depending on the pre-loaded formats.
If 1.Cancel is selected, the format will not be deleted. The format list will be dis-
played.
Select 2.Yes to delete.
A rotating hourglass icon is visible in the upper right corner while printer is busy
deleting your format.