Instruction manual

Section 3: Configuration and Operation
Page 3-12 TH2 Series Operator Manual
3.3 PRINT MENU (Cont’d)
3.3.2 To make print-out from a pre-loaded Table
The following flow shows the procedure for printing media from a demo table format that was pre-loaded in
the factory.
Menu Description
PRINT menu
The contents of the PRINT menu can be edited. The three items, Format, Table
and On-line, can be set to be shown or hidden on the display. Please refer to
Section 3.6.13 To set the PRINT menu appearance, for details.
Displays search field and enables selection of format to print by entering char-
acters in search field or by using the , arrow buttons and enter button.
Note:
If there is only one table in the printer, this screen will not be displayed. You will
step directly to the sub content of the table as in the next display.
*The contents of the display vary depending on the pre-loaded formats.
Displays list of pre-defined items and enables alphabetic search by input of
character(s) in ID field or select from the list by using the , arrow buttons
and enter button.
*The contents of the display vary depending on the pre-loaded formats.
Power on
and start-up
PRINT
menu
Select 2.Table
Select 1.QSR Demo
Press “B” to
search “Bacon”
Press
Start printing
Key in the Quantity
to the input field
Press
Press to
pause printing
Press F1 for
Help menu
Press to
continue
printing
Press to
continue
printing
Press F1
*
*
*
*
The details of the screen
may vary depending on
the loaded tables.