Instruction manual

Section 2: Installation
TH2 Series Operator Manual Page 2-9
2.4 CONNECTIONS (cont’d)
2.4.4 Turning On the Power
Press the power button on the operator panel for one
second.
The LCD displays the PRINT menu after the start-up
display.
Note:
The first PRINT menu might not look like this screen. It
depends on customer application loaded into the printer.
2.4.5 Turning Off the Power
When you have completed the printing job, turn the printer
off.
Be sure to confirm that the print job is completed.
Press and hold the power button for more than three
seconds until you hear two short beeps.
The LCD display is turned off.
Warning
Do not operate the power button or plug in/ unplug the
power cable while your hands are wet. Doing so may
cause an electric shock.
Caution
• Be sure to turn the printer power off before detaching the DC power plug of the AC adapter, or dis-
connecting the AC power plug.
• Note that disconnecting the AC power plug in ways other than described above may prevent the
printer from correctly storing settings in memory.
• No battery pack is necessary when the AC adapter is used. When the battery pack and AC
adapter are used simultaneously, the printer begins to charge the battery, if the battery is not fully
charged.
Display is
turned off