Instruction manual

Section 8: Appendix
TH2 Series Operator Manual Page 8-5
8.3 OPERATION MODE SELECTION (cont’d)
8.3.2 Tear Off Mode
In Tear Off mode, the media is fed forward to the tear bar when all labels are printed.
When printing starts (A. in the figure below), the media is in a position so that the previous label could be torn
off.
Before printing label 1, the media has to be fed back so that label 1 is in the printing start position (B. in the
figure below).
Label 1 and label 2 are printed. Now the printer waits 1 second (configurable) for more print jobs with label 3
in printing start position. (C. in the figure below).
Since no more print jobs were received, the media is fed forward so label 1 and label 2 can be torn off on the
tear bar (D. in the figure below).
Tear bar
B. Media fed
back to
printing start
position
A. Before
printing
Feed
direction
2
3
1
Print head
3
2
1
4
2 1
3
5
4
2 1
3
5
C. Printer is
waiting for
more print jobs
D. No more
jobs received.
Media is fed
forward so
label 1 and 2
can be torn off.