Instruction manual

Section 7: Interface Specifications
TH2 Series Operator Manual Page 7-5
7.3 LOCAL AREA NETWORK (LAN) ETHERNET AND WIRELESS LAN (cont’d)
7.3.3 Software Specifications
Protocol TCP/IP
Network layer ARP, RARP, IP, ICMP
Session layer TCP, UDP
Application layer FTP, DHCP, HTTP
Notes
• Send the print data by dedicated socket protocol.
• Use socket connection to get the printer status.
• From applications TCP client sockets can be created.
7.3.4 TCP/IP Specifications
In socket connection, the printing operation and the status are monitored. In this case, multiple connections
cannot be established at the same time.
IP address and variables can be set using the Printer setup, or in application.
Wi-Fi
9) Security (Combination of authentication and encryption)
Ad hoc mode
Security IEEE 802.11 IEEE 802.11i Encryption
None None None None
WEP Open System None WEP key
Shared Key
Infrastructure mode
Security IEEE 802.11 IEEE 802.11i Encryption
None None None None
WEP Open System None WEP key
Shared Key None
WPA None PSK TKIP
EAP
WPA2 None PSK AES
EAP
Dynamic WEP None EAP WEP key
[Notes]
Consult your system administrator about the interference from radio waves when using the
printer near medical equipment and facilities.