Instruction manual

Section 7: Interface Specifications
TH2 Series Operator Manual Page 7-3
7.3 LOCAL AREA NETWORK (LAN) ETHERNET AND WIRELESS LAN
7.3.1 Basic Specifications of LAN
LAN interface is available with Type 2 boards.
Interface connector
Cable type: For 10BASE-T and 100BASE-TX
Cable length: 100m or less
Link/Status LED
Status LED lights up when establishing the LINK with Ethernet equipment. The LINK is
established by Auto Negotiation.
LED Color Conditions
LINK/ Active Yellow
LED on when establishing the link.
LED blink when Data Transmit or Receive.
SPEED Green
Lights off when recognizing the destination
10BASE-T
Lights up when recognizing the destination
100BASE-TX
Maintenance function
[Printing LAN configuration information]
LAN configuration information will be printed on the second and third sheet of factory test
print.
[Initializing LAN configuration information]
LAN configuration information will be initialized through Service Mode or Advanced setup.
For more details, refer to the authorised SATO service personnel.
Communication
configuration
The following settings can be configured via the Printer network setup.
Item Setting range
IP address 0.0.0.0 ~ 255.255.255.255
Gateway address 0.0.0.0 ~ 255.255.255.255
Netmask 0.0.0.0 ~ 255.255.255.255
IP address setup Static, DHCP, RARP
Name server 0.0.0.0 ~ 255.255.255.255
2-port connection by Port 1024 and Port 1025 or 1 port connection by Port 9100.