Instruction manual

Section 6: Basic Specifications

TH2 Series Operator Manual Page 6-1

BASIC SPECIFICATIONS

6.1 PRINTER BASIC SPECIFICATIONS

• The above dimensions and weight are excluding the battery pack.

MODEL NAME

TH208

PHYSICAL CHARACTERISTICS

Width 132 mm (5.2”)

Height 147 mm (5.8”)

Depth 194 mm (7.6”)

Weight 1.7 kg (3.7 lbs.)

POWER SUPPLY

AC Adapter Voltage

Input power voltage: AC 100V - 240V, 50/60 Hz, +/-10% (Full range)

Output voltage: DC 19V, 3.6A

Power Consumption

At peak: 42.5W / 64.0VA (Print ratio 30%)

In standby: 6.2W / 12.6VA

ENVIRONMENTAL (EXCLUDING MEDIA)

Operating Temperature 0°C to 40°C (32°F to 104°F)

Storage Temperature -5°C to 60°C (23°F to 140°F)

Operating Humidity 30 to 80% RH, Without condensation

Storage Humidity 30 to 90% RH, Without condensation

Method Direct Thermal

Print Speed (selectable)

50 to 100 mm/sec (2 to 3.9 Inch/sec)

(Setting value: 50, 75, 100 mm/sec)

*Print speed varies depending on the type of media used.

Resolution 8 dots/mm (203 Dots Per Inch)

Maximum Print Width 56 mm (2.2”)

Maximum Print Length 156 mm (6.1 “)

Print darkness Darkness level: 1 to 5

Label issuing mode

Standard: Continuous mode, Dispenser mode, Tear-off mode, Sensor off mode

Option: Cutter mode, Linerless mode (with cutter), Linerless mode (without cutter)