Instruction manual

Section 3: Configuration and Operation
TH2 Series Operator Manual Page 3-75
3.9 F1 SHORTCUTS MENU (Cont’d)
Menu Description
3.Preview
This function can be used prior to printing a label to view the fields that shall be
printed.
Press F1 button and then select 3.Preview. The screen to the left is displayed
showing the different fields to be printed. Use , arrow buttons to scroll
down through the fields, key in a field number using the ten-buttons. Press
enter button or Menu/page-up button to go back to the previous screen, in
this case the QUANTITY screen.
For example, select format 1.Price Demo and hit enter button until screen
QUANTITY [1 ] is displayed.
4.Time Offset
Add a temporary offset in number of days to the date that has been set in the
Real-Time-Clock. This offset will be cleared when powering off the printer.
Add a temporary offset in number of hours to the time that has been set in the
Real-Time-Clock. This offset will be cleared when powering off the printer.
5.Profile
5.Profile gives access to select the saved Profile.
The detailed description of the PROFILE menu is explained on Section 3.7.1
When Profile is selected in the SETUP menu.
Note:
If no profiles are created, No profiles will be displayed instead.
6.Setup/
6.Setup/ gives access to SETUP menu.
Notes:
• 6.Setup/ is selectable only if one or more of its sub-menus are selected.
• The sub-menus to 6.Setup/ are shortcuts to the printer set up menu.
The detailed description for each sub-menu were explained on Section
3.7.2 When Media is selected in the SETUP menu, Section 3.7.5 When
Regional is selected in the SETUP menu and Section 3.8 Advanced
Setup Menu.