Technical data

Unit 4: Printer Configuration
S8400 Series Operator Manual
4-46 PN: 9001160 (C)
Used to enable or disable the Shift Code menu parameters. The YES option is enabled and the
NO option is disabled.
Note the YES option must be selected to access the Work Shift Mode menu.
DOWNLOAD MODE (TABLE 4-15)
MENU DESCRIPTION
Is an informational screen only and confirms that the printer is ready to receive the data.
Screen confirms that downloading is in process and displays its progress status. A tinted field will
move laterally from the left toward the right as downloading progresses. When the tinted bar
reaches 100 on the scale, downloading is complete.
This menu screen appears when all of the data has been received and the process is complete.
BOOT DOWNLOAD MODE (TABLE 4-16)
MENU DESCRIPTION
Allows the selection of location of download, via the INTERFACE or CF Card.
Permits the sub-port to be used for the download process. The I/F-1 port is not in use. I/F-2 is the
standard interface type. This screen only appears if INTERFACE was selected in the first screen.
This screen only appears if CARTRIDGE was selected in the first screen and prompts to confirm
that the CF Card has been installed and set up for use.
Confirms the printer is on standby for receiving data.
Screen confirms that downloading is in process and displays its progress status. A tinted field will
move laterally from the left toward the right as downloading progresses. When the tinted bar
reaches 100 on the scale, downloading is complete.
HIDDEN MODE (TABLE 4-14)
MENU DESCRIPTION
SHIFT CODE
YES NO
DOWNLOAD
WAITING
DOWNLOADING
DOWNLOAD
COMPLETE
BOOT DOWNLOADER
INTERFACE
CF CARD
SELECT INTERFACE
I / F - 2
I / F - 1
PROGRAM DOWNLOAD
SET CF CARD
YES NO
PROGRAM DOWNLOAD
READY
PROGRAM
DOWNLOADING