Technical data

Unit 4: Printer Configuration
S8400 Series Operator Manual
4-42 PN: 9001160 (C)
Allows the selection of large (10cm) or small (4cm) media width. These are the only two options.
This screen shows the setting of factory pitch volume.
This setting screen is displayed for VA/VE substrate only when performing test print. Press
ENTER to start test print.
Use ↑ and ↓ keys to change factory offset value, and its range is between -3.75 and +3.75.
Printing operation can be stopped temporarily by pressing ENTER while printing.
Initiates test printing activity.
FACTORY MODE WITH RFID INSTALLED (TABLE 4-11)
MENU DESCRIPTION
This is the first menu screen of the Factory Mode with RFID Installed. It includes the Service
Mode, Factory Mode, and RFID Mode. Provides a prompt on the action required in order to
proceed to the Factory Mode with RFID Installed.
This screen permits the operator to enable or disable the RFID Module.
This screen allows selection of the installed RFID module type.
This screen allows selection of the RFID frequency ban for the specific geographic location.
FACTORY MODE (TABLE 4-10)
MENU DESCRIPTION
PRINT SIZE
SMALL LARGE
F-PITCH OFFSET
+X.XX
TEST PRINT
PRESS ENTER KEY
MAINTENANCE MODE
SERVICE MODE
FACTORY MODE
RFID MODE
RFID MODULE
ENABLE DISABLE
MODULE SELECT
Sirit TMagic
RFID Freq Band
North America
Taiwan
Malaysia
Thailand
European Union
Korea
China