Technical data

Unit 4: Printer Configuration
S8400 Series Operator Manual
4-41 PN: 9001160 (C)
Allows view of the recorded linear meters of printed media by the printer’s internal counters.
Is an informational screen that provides the length of media used since printer setup.
Enables view of the printer’s cutter counter identifying the quantity of cut cycles by that cutter.
Is an informational screen that provides the printed length of media using the existing print head.
The head counter should be reset each time the print head is replaced.
Enables view of the printer’s dispense counter identifying the quantity of times the printer has
dispensed a label.
Enables the printer’s serial number to be recorded within its memory.
Enables the revision number of the main circuit board to be recorded within its memory.
Enables the revision number of the interface board to be recorded within its memory.
Allows the determination of whether to test print or not.
If the YES option is selected from the previous screen, this menu allows the test print type to be
selected.
FACTORY MODE (TABLE 4-10)
MENU DESCRIPTION
COUNTER
INDICATION
NONE
LIFE
HEAD
CUT
DISPENSE
LIFE COUNTER
X.X M
CUT COUNTER
X
HEAD COUNTER
[ 1 ] X.X M
[ 2 ] X.X M
[ 3 ] X.X M
DISPENSE COUNTER
X.X M
SERIAL NO.
S/N XXXXXXXX
MAIN PCB
REVISION
REV X.X
INTERFACE BOARD
REVISION
REV X.X
TEST PRINT
YES NO
TEST PRINT MODE
FACTORY
AIAG
SCALE
RIGHT
LEFT
GRAY
N-PATTERN