Technical data

Unit 3: Installation
S8400 Series Operator Manual
3-4 PN: 9001160 (C)
INSTALLATION REQUIREMENTS
The printer has five bores in its center frame for the purpose of mounting to a support structure. Refer to the
following list of mounting requirements.
• The support structure must be firmly secured to the floor or production machinery.
• The support structure must be sturdy and stable so as to prevent unnecessary movement or vibration.
• The printer is to be mounted to the support structure using attaching hardware design to accommodate the
printer’s weight, as well as, the prevailing operational and environmental conditions within the facility.
• A power supply receptacle or junction box is to be properly secured within regulated proximity to the printer.
• The power supply is to be metered conducive to the printer’s design requirements.
• The printer must be installed so that its output side is within the designated distance and height relative to the
applicator.
• Media supply dispensers must be mounted or placed with operational distance of the printer’s input side.
Figure 3-2, Typical Printer/Applicator Process
NOTE: Figures 3-2 and 3-3 are to be used as instructional displays
only and are not to be literally interpreted as precise examples.