Technical data
Table Of Contents
- 0. i Cover B
- 0. i Copyright B
- 0. i TOC B
- 1. i Introduction B
- 2. i Programming Concepts B
- 3. i Code Quick Reference B.backup
- 4. i Standard Command Codes B
- 5. i Optional Command Codes B
- 6. i Bi-Directional Communications B
- 7. i Appendix B
- 7
- appendix
- custom graphics
- CUSTOM GRAPHICS EXAMPLE
- 1. Determine the matrix size for the graphic. It must be in 8 dot by 8 dot blocks. The example here has six blocks horizontally and six blocks vertically (48 x 48).
- 2. Lay out a grid and draw the image on the grid.
- 3. Transfer the image into a bit map representation and then into hexadecimal format:
- 4. Using the hexadecimal data, send the following code to print the graphic image as designed.
- 5. To send the data in binary format, the software must convert the data into binary format before transmitting it to the printer. Using the BASIC programming language for example, this is done by notation “CHR$ (&HC0)” which sends the hexidecima...
- PCX GRAPHICS EXAMPLE
- CUSTOM GRAPHICS EXAMPLE
- printer configuration commands
- reference tables
Unit 4: Standard Command Codes
“i” Programming Reference
4-31 PN: 9001158B
EU
FUNCTION
Specifies the composite symbol of EAN/UCC.
FORMAT
<ESC>EUaabbn...n (Format 1)
aa = 1D barcode symbology
01: RSS-14 (13 digits)
02: RSS-14 Truncated (13 digits)
03: RSS-14 Stacked (13 digits)
04: RSS-14 Stacked Omni-directional (13 digits)
05: RSS Limited (13 digits)
07: UPC-A (11 digits)
08: UPC-E (10 digits fixed)
09: EAN-13 (12 digits)
10: EAN-8 (7 digits)
bb = Minimum bar width in dots (01 to 12)
n = Print data in digits (up to 120 for 1D and 2D)
<ESC>EUaabbcccn...n (Format 2)
aa = 1D barcode symbology
11: UCC/EAN-128 with CC-A/B (48 digits)
12: UCC/EAN-128 with CC-C (48 digits)
bb = Minimum bar width in dots (01 to 12)
The following command is only to be used when the minimum barcode width is set to 01.
cccf = Barcode height in dots (001 to 500)
n = Print data in digits (up to 120 for 1D and 2D)
Place after <ESC>V, <ESC>H but before <ESC>Q.
EXAMPLE
<ESC>A
<ESC>V0100<ESC>H0100
<ESC>EU030245878900
<ESC>Q1
<ESC>Z
OUTPUT
(4-21)