Technical data
Table Of Contents
- 0. i Cover B
- 0. i Copyright B
- 0. i TOC B
- 1. i Introduction B
- 2. i Programming Concepts B
- 3. i Code Quick Reference B.backup
- 4. i Standard Command Codes B
- 5. i Optional Command Codes B
- 6. i Bi-Directional Communications B
- 7. i Appendix B
- 7
- appendix
- custom graphics
- CUSTOM GRAPHICS EXAMPLE
- 1. Determine the matrix size for the graphic. It must be in 8 dot by 8 dot blocks. The example here has six blocks horizontally and six blocks vertically (48 x 48).
- 2. Lay out a grid and draw the image on the grid.
- 3. Transfer the image into a bit map representation and then into hexadecimal format:
- 4. Using the hexadecimal data, send the following code to print the graphic image as designed.
- 5. To send the data in binary format, the software must convert the data into binary format before transmitting it to the printer. Using the BASIC programming language for example, this is done by notation “CHR$ (&HC0)” which sends the hexidecima...
- PCX GRAPHICS EXAMPLE
- CUSTOM GRAPHICS EXAMPLE
- printer configuration commands
- reference tables
“i” Programming Reference PN: 9001158B
<ESC>XB XB Font 4-19
<ESC>XL XL Font 4-19
<ESC>XM XM Font 4-19
<ESC>XS XS Font 4-19
<ESC>XU XU Font 4-19
<ESC>OA OCR-A Font 4-19
<ESC>OB OCR-B Font 4-19
<ESC>RD CG Fonts 4-20
<ESC>T External Character 4-23
<ESC>XB Smoothing 4-24
<ESC>XL Smoothing 4-24
Barcode Commands 4-25
<ESC>B Barcode, Ratio 1:3 4-25
<ESC>BD Barcode, Ratio 2:5 4-25
<ESC>D Barcode, Ratio 1:2 4-25
<ESC>d Barcode, Human Readable Information (HRI) 4-27
<ESC>BC CODE 93 Barcode 4-28
<ESC>BG CODE 128 Barcode 4-29
<ESC>BP Postnet 4-30
<ESC>EU EAN/UCC Composite Symbol 4-31
2D Code Commands 4-33
<ESC>2D10 PDF417 4-33
<ESC>2D12 Micro PDF417 4-34
<ESC>2D20 Maxi Code 4-35
<ESC>2D30 QR Code (Model 2) 4-36
<ESC>2D31 QR Code (Model 1) 4-36
<ESC>2D32 Micro QR Code 4-38
<ESC>2D50 Data Matrix (ECC200) 4-39
System Commands 4-40
<ESC>BU Buzzer Activation 4-40
<ESC>CS Print Speed 4-41
<ESC>#E Print Darkness 4-42
<ESC>2S 2-Color Pint Range 4-43
<ESC>A3 Base Reference Point 4-44
<ESC>PO Offset 4-45
<ESC>@ Offline/Pause 4-46
<ESC>PG EEPROM Setup 4-47
<ESC>I1 Serial Interface, Configuration 4-48
<ESC>I2 IrDA Interface, Configuration 4-49
<ESC>I3 IrDA Interface, Device Name Configuration 4-50
<ESC>IG Sensor Type Selection 4-51
<ESC>PM Print Mode Selection 4-52
<ESC>QS System Priority 4-53
Graphic Commands 4-54
<ESC>G Graphics, Custom 4-54
<ESC>GM Graphics, BMP File 4-55
Memory Store/Recall Commands 4-56
<ESC>&S Form Overlay, Store 4-56
<ESC>&R Form Overlay, Recall 4-58
<ESC>YS Format, Store 4-59
<ESC>YR Format, Recall 4-60
<ESC>GI Graphic, Store 4-61
<ESC>GR Graphic, Recall 4-62
<ESC>GT Graphic, BMP File Store 4-63
<ESC>GC Graphic, BMP File Recall 4-64
<ESC>* Clear 4-65
OPTIONAL COMMAND CODES
Bluetooth Commands 5-2
<ESC>I6 Pin Code, Configuration 5-2
<ESC>I7 Authentification Mode, Configuration 5-3
<ESC>I8 Device Name, Configuration 5-4
WLAN Commands 5-5
<ESC>WC EAP Authentication Specification 5-5
<ESC>WE Password Specification 5-6
<ESC>WF Secret Key Specification 5-7