Technical data

Unit 1: Technical Data
MB400i/MB410i Operator Manual PN 9001190C Page 1-3
PRINT
Type Direct Thermal Only
Speed 4 Inches Per Second (103mm/s) in normal mode
3 Inches Per Second (75 mm/s) in dispenser mode
Dual color printing or high resolution modes reduce
speed
Resolution MB400i: 203 Dots Per Inch (8 d/mm)
MB410i: 305 Dots Per Inch (12 d/ mm)
Print Module (Dot Size) 0.0049 Inches (0.125 mm)
Maximum Print Width 4.09 Inches (104 mm)
Maximum Print Length 11.69 Inches (297 mm)
MEDIA
Type Direct Thermal Roll media
Wind Direction Face out
Roll Diameter
Maximum outer diameter:
2.63 inches (67 mm ±0.5 mm)
Core Diameter
Inner Core diameter:
0.75 inch (19 mm), 1 inch (25 mm)
Size
[Brackets indicate with liner sheet]
Standard
Width
2 to 4.3 Inches (50 to 111 mm)
[2.1 to 4.4 Inches (53 to 114 mm)]
Length
1 to 11.6 Inches (25 to 297 mm)
[1.1 to 11.8 Inches (28 to 300 mm)]
Dispenser
Width
2 to 4.3 Inches (50-111 mm)
[2 to 4.4 Inches (53 to 114 mm)]
Length
1 to 7.1 Inches (25 to 182 mm)
[1.1 to 7.2 Inches (28 to 185 mm)]
Linerless
Width 2 to 4.2 Inches (53 to 107 mm)
Length 1 to 7.1 Inches (28 to 182 mm)
Thickness
Label: 2.5 Mil to 7.5 Mil (0.064 ~ 0.190 mm)
Non-adhesive paper: 2.5 Mil (0.064 mm)
PROCESSING
CPU 32 Bit RISC
Flash ROM 4 Megabyte
RAM 2 Megabyte