User's Manual

19
Before Starting
Battery Status
1. Battery near end
When the battery is getting low, the battery near end is detected and the
BATTERY LED indicator lights up in orange. The keys can still be operated,
however the battery should be recharged.
2. Low Battery Error
When the battery gets empty, a low battery error is detected and the BATTERY
LED indicator lights up in red. The keys cannot be operated, and after 30 seconds
the power automatically turns off. Make sure to recharge the battery.
Status BATTERY LED indicator
Battery near end Light (orange)
Low battery error Light (red)
The BATTERY LED indicator does not light up during printing or an error, even
if battery near end or low battery error has been detected.
Caution!
• Make sure to turn the power off when removing or replacing the battery pack.
• If you do not plan to use the printer for long period of time, make sure to remove the
battery pack.
If not removed, the battery may get over discharged and may not be recharged.
• Do not store the battery in places of high temperature.
• BAT400 is the specified battery pack for the Barcode Printer MBXX series.
• Make sure to charge the battery with specified battery charger (Model CHG400).
• Danger of explosion if battery incorrectly replaced.
• Replace only with the same or equivalent type
• Dispose of used batteries according to the manufacturer’s instructions.