User's Manual

16
Before Starting
Before Starting
Charging the Battery Pack
You can recharge the battery pack by inserting it into the battery charger (optional).
Plug one end of the AC adapter into the
battery charger and the other end into
the wall outlet.
Insert the battery pack. Make sure the
connector on the battery pack is facing
down and insert it into the charger.
• The CHARGE indicator will light in red
when charging starts.
• The CHARGE indicator will light in green
when charging is complete (Fully charged).
When charging is complete, remove the
battery pack from the charger.
For Battery Charger:Model CHG400 is the specified battery charger for battery
pack Model BAT400. Use the UL Listed class2 AC Adapter or Power Supply
marked“LPS”, SATO’S Model ACH400 (UL Listed I.T.E Power Supply, SAC,
Model SA60-19) ,rated output 19Vdc, 3200mA.