Specifications

MB200 Quick Guide Pg 5
Installing and Removing Battery Pack
Remove the protection case.
1. Place your finger on the battery cover ribbed area, and
slide it as far as it will move in the direction of the
arrow.
2. After releasing the battery cover lock, open the battery
cover in the direction of the arrow.
3. Insert the battery pack. After that, take the above
procedure in reverse order to close the battery cover.
MB200 Quick Guide Pg 10
Changing Roll Width
1. Check the width of the roll. Set the label
guide scale to the width of the label, and slide
until it overlaps.
2. Roll the label guide clockwise and secure it in
position. When rolling, hold the place on the
label guide indicated in the illustration nearby.
Perform Steps 1 and 2 when changing label rolls.