Specifications

MB200 Quick Guide Pg 13
MB200 Specifications
Item Details
Method Thermal
Head Density 8 dots/mm
Maximum Printing Size Width 48mm x 160mm
Printing Speed Max. 62.5mm/sec (may vary from environment and
printing rate)
Size and Weight Printer: W94mm x D120mm x H64mm (excluding the
belt clip)
Weight: under 430g (with battery and without the
protector)
Power (Battery) Packet type (Lithium ion battery); 1500mAh (DC7.2V);
Able to print 2 rolls of thermal label (26m) with fully
charged battery in the Continuous mode. (Printing rate
under 30%)
Paper Thickness
Label Shape
Label Size
0.08mm – 0.18mm (always use specified labels)
Rolled paper, maximum outer diameter: 58mm
Width: 25.4 – 55mm (28.4 – 58mm)
Pitch: 13 – 160mm (16 – 163mm)
Printing Mode Continuous and Dispense
Self Diagnosing Function Head Check / Battery Check / Paper End
Head Open / Test Printing
Power Save Function In Sleep mode after 5 seconds without any operation, and
Auto Power Off mode after 5 minutes.
Interface
• RS232C
}
• TTL }
• Wireless
• Optical Coupler
High density special connector
Weak radio unit (option)
IrDA (IrDA Standard Ver. 1.2 compliant.
Transmittal Distance: Max. 15 – 20cm)
Label Sensor Opaque Projector Sensor
Font Magnification x1 – 6
Character Rotation 0º , 90º , 180º , 270º
Font SATO standard font: x21, x22, x23,
Kanji 16 x 16, 22 x 22, 24 x 24 Kaku Gothic
(JIS First/Second standard)
MB200 Quick Guide Pg 2
Installation
Remove the MB200 from its packing container. Check to make sure you have the following
accessory items:
Careful considerations must be given when selecting location of the printer, especially to
environmental considerations. To obtain optimum results from MB200, always try to avoid
operation locations influenced by:
• Direct or bright sunlight, as this will make the label sensor less responsive and may
cause the label to be sensed incorrectly.
• Locations which have extreme temperature, as this can create electrical problems on
the circuits in the printer.
• The installed location of the printer should be ideally be in areas free from dust,
humidity and sudden vibrations.
Consumables
Always use SATO labels in MB200 printer. The use of incorrect material may cause
malfunctions of the printer and void the printer warranty.
Warranty Card
Quick Guide