Service manual

Page 4-13

Section 4. Electric Checks and Adjustments

PN 9001080

Rev. A

SATO M-8485Se Standard Print Engine

Service Manual

4.10 Calendar Clock Setting

initializing

advanced mode

STEP PROCEDURE

1. Turn On the power while simultaneously pressing the LINE key. When the

printer emits one long beep, release the LINE key to display the Initializing

screen. It will then immediately display ADVANCED Mode screen.

2. Press the FEED key 4 times to advance to the Calendar Enabled screen.

3. Press the LINE key to select YES then press the FEED key.

4. Set Month, Day, Hour and Minute as follows:

a) Press the FEED key until the cursor is positioned under the digit you

wish to change. Then press the LINE key to change the value.

b) Press the FEED key to advance to the next set of digits. Press the LINE

key to change the values as in Step a).

5. After the Minute setting is finished, press the FEED key to advance to the

next screen.

6. Turn off the power switch.

calendar enabled

yes no

calendar

00/00/00 00:00

euro code