Service manual

Page 1-5
Section 1. Overview and Specifications
PN 9001080
Rev. A
SATO M-8485Se Standard Print Engine
Service Manual
1.4 Operation Panel
1.5 Dip Switch Panel
The DIP Switch panel is located under the front lid and contains two 8-position DIP
switches and three adjustment potentiometers. Adjustment procedures for these are listed
in Section 2, Configuration.
DSW1 is located on RS232C I/O Card if installed.
DIP SWITCHES
POTENTIOMETERS
CONTROL KEYS &
INDICATORS
LCD DISPLAY
OPERATION PANEL
LCD Display 2 Line x 16 Character display
LABEL LED Illuminated when label is out
RIBBON LED Illuminated when ribbon is out
ERROR LED Illuminated when errors have occurred
ON-LINE LED Illuminated when printer is On-Line
LINE KEY Switches the printer On-Line or Off-Line. Can also be used
as a Pause function key to stop label during the printing
process.
FEED KEY Feeds one blank label
POWER ON/OFF
SWITCH