Service manual

Page 2-30
Section 2. Configuration
PN 9001080
Rev. A
SATO M-8485Se Standard Print Engine
Service Manual
This selection specifies whether or not the printer will automatically feed a blank label
when it is placed in the Online mode.
Auto online feed
yes no
LCD Panel Printer— Service Mode
STEP PROCEDURE
1. Use the LINE key to step the underlined cursor to the desired setting.
IF Yes is selected, the printer will feed a blank label anytime an error
condition is cleared.
If No is selected, the display will advance to the mode display.
STEP PROCEDURE
1. Use the LINE key to step the underlined cursor to the desired setting.
IF Yes is selected, the printer will feed a blank label anytime it enters
the Online mode.
If No is selected, the display will advance to the mode display.
This selection specifies whether or not the printer will feed a blank label automatically
when an error condition is cleared.
Feed on Error
Yes No
feed on error
yes no
Auto Online Feed
Yes No
STEP PROCEDURE
1. Use the LINE key to step the underlined cursor to the desired setting.
IF Yes is selected, the printer will reprint the last label when the FEED
key is pressed when the printer is Online. If the printer is Offline,
pressing the FEED key will feed a blank label.
If No is selected, the display will advance to the mode display.
This selection specifies whether or not the printer will print the last printed label stored in
memory when the FEED key is pressed in the Normal Online mode.
Reprint W/Feed
Yes No
reprint w/feed
yes no