Service manual

Page 6-44
Section 6. Replacement Procedures
PN 9001080
Rev. A
SATO M-8485Se Standard Print Engine
Service Manual
Replacing the Label Out Sensor
6-74
Fig.
REMOVE (2) SCREWS TO
DETACH COVER PLATE
6-77
Fig.
6-78
Fig.
UNSNAP THE CABLE
HOLDER AND DETACH THE
SENSOR CABLE
UNPLUG SENSOR CABLE
FROM SENSOR HARNESS
MARKED “SEN7”
REMOVE (1) SCREW TO
DETACH LABEL OUT
SENSOR FROM FRAME
Figs. 6-75
REMOVE (2) SCREWS TO
DETACH SENSOR MODULE
FROM FRAME
6-76
Fig.