Service manual

Page 6-43
Section 6. Replacement Procedures
PN 9001080
Rev. A
SATO M-8485Se Standard Print Engine
Service Manual
Replacing the Label Out Sensor
RELEASE THE NIP ROLLER
LATCH AND SWING OPEN THE
NIP ROLLER ASSEMBLY
UNLATCH HEAD
LOCK LEVER
NIP ROLLER
ASSEMBLY
6-71
Fig.
UNFASTEN AND REMOVE
THUMB SCREW AND
REMOVE NIP ROLLER
ASSEMBLY
REMOVE (2) ALLEN
SCREWS ATTACHING
BRACKET TO PLATEN
FRAME
6-72
Fig.
MOVE BRACKET SLIGHTLY
OUT OF POSITION AT THE
SAME TIME HOLDING DOWN
THE NIP ROLLER LATCH
FOR ACCESS TO THE
SCREW ON THE COVER
PLATE
Figs.
6-73