Service manual

Page 6-41
Section 6. Replacement Procedures
PN 9001080
Rev. A
SATO M-8485Se Standard Print Engine
Service Manual
Replacing the Platen
Figs.
6-69
END OF SUPPORT
BEARING MUST CLEAR
CRADLE FRAME
REMOVE CRADLE
FRAME CONTAINING
PLATEN
IF NECESSARY,
REMOVE AND REPLACE
GEARS ON PLATEN
“E” CLIP
SCREW
COLLAR
PLATEN
BUSHING
POSITION COLLAR
AGAINST BUSHING
AND TIGHTEN SCREW
AFTER INSTALLATION
POSITION COLLAR
AGAINST BUSHING
AND TIGHTEN SCREW
AFTER INSTALLATION
Figs. 6-68