Service manual

Page 6-35
Section 6. Replacement Procedures
PN 9001080
Rev. A
SATO M-8485Se Standard Print Engine
Service Manual
Replacing the Label Gap Sensor Board (Top 1/2)
REMOVE (2) SCREWS AND
WIGGLE OFF MEDIA HOLD
DOWN COVER TO EXPOSE
SENSOR ASSEMBLY
Figs. 6-55
SENSOR ASSEMBLY
CAREFULLY SLIDE SCREW
DRIVER THROUGH SPACE
AND REMOVE (2) SCREWS
TO DETACH SENSOR ASSY
Figs.
6-56
SENSOR ASSEMBLY
USE ALLEN WRENCH AND
REMOVE TO SCREWS TO
DETACH SENSOR
MODULE FROM BRACKET
6-57
Fig.