User`s manual

50
Chapter 3 Configuration Setting Compatibility
LCD Panel, Normal Mode
• SATO setting: PRINT DARKNESS
Used to adjust the amount of heat (i.e. power) applied to the head for
printing.
Printronix setting:
SL5000r/T5000r: MEDIA CONTROL X Print Intensity
SL4M/T4M: MEDIA SETUP X Print Intensity
• SATO setting: PRINT SPEED
Sets the print speed in inch/second.
Printronix setting:
SL5000r/T5000r: MEDIA CONTROL X Print Speed
SL4M/T4M: MEDIA SETUP X Print Speed
• SATO setting: PITCH OFFSET
The label Pitch is the distance from the leading edge of a label and the
leading edge of the next label.
Printronix setting:
SL5000r/T5000r: MEDIA CONTROL X Ver Image Shift
SL4M/T4M: MEDIA SETUP X Ver Image Shift
• SATO setting: CANCEL PRINT JOB
If the printer has a print job(s) in memory, selecting YES will cause the
job(s) to be cleared.
Printronix setting:
SL5000r/T5000r and SL4M/T4M: Cancel Key
LCD Panel, Advanced Mode
• SATO setting: Zero Slash
This setting determines if a zero is printed with a slash or without a slash.
Printronix setting: STGL SETUP X Slash Zero
• SATO setting: AUTO ONLINE
This setting determines the mode in which the printer powers up.
Printronix setting:
SL5000r/T5000r: PRINTER CONTROL X Power-up State
SL4M/T4M: PRINTER SETUP X Power-up State
• SATO setting: PRINT OFFSET V PRINT OFFSET H
This setting changes the base reference point for all subsequent label
jobs. It’s effect is identical to the <ESC>A3 Base Reference point
command.
Printronix setting:
SL5000r/T5000r: STGL SETUP X Hor. BaseRefPoint
STGL SETUP X Ver. BaseRefPoint
SL4M/T4M: STGL SETUP X Hor. BaseRefPoint
STGL SETUP X Ver.BaseRefPoint