User`s manual

Supported Legacy Commands
45
PCaa,bbPCF,a,.....z – Printer Setting
Sets the default printer configuration in Flash ROM. The host commands to
modify configuration settings will modify the current configuration values as if
the user changed them manually on the front panel. They will however not be
saved to NOVRAM as the SATO printer does. It will be the user’s
responsibility to save the approprite configuration as well as the power-up
configuration.
PHa – Print Type
Selects the thermal printing method.
PMa – Print Mode
Selects desired backfeed operation.
POabcc – Pitch Offset
Sets the pitch type, direction, and offset to be used.
Legacy Commands
Supported Legacy Commands
AX – Expanded Print Length
This command sets the printer to the Expanded print length (14 inches). EX0
is the recommended replacement.
N – Rotate, Moving Base Reference Point
Sets the original base reference point and returns printing to normal
orientation. % is the recommended replacement.
R – Rotate, Moving Base Reference Point
Rotates the printing of all subsequent images by 90 degrees
counterclockwise each time it is used. Also moves the base reference point,
% is the recommended replacement.
Command
Command
Description
Support
Reference
SL5000r/
T5000r
SL4M/T4M
AX Expanded Print Length Full Full page 45
N Rotate Full Full page 45
R Rotate Full Full page 45