User`s manual

42
Chapter 2 Expanded Memory Option Commands
Examples
ppi4_t03.bmp (in flash) TrueType bitmapped font at location 03.
ppi4_012.pcx (in flash) PCX image at location 12.
For SL5000r/T5000r printers, the command to print the expanded memory
status (<ESC>BJS) is ignored. However, the user can view the flash contents
by using the “Print File List” feature from the “Printer Control” menu. This
shows the STGL files present in the flash file system using the names listed
above.
BJDcccccddddee...e – Download Bit Mapped TrueType Font
Data
Downloads the bitmapped TrueType font data to the memory area specified.
BJ) – End TrueType Font Storage
Ends the bitmapped TrueType font storage process. See “Expanded Memory
Functions” on page 41.
BJFaaaaaaaa – Initialize Memory Card
Initializes the Memory Area and formats it for use. See “Expanded Memory
Functions” on page 41.
BJRabbccddeeeeff..f – TrueType Font Recall
Recalls a previously stored bitmapped TrueType font for use. See “Expanded
Memory Functions” on page 41.
BJS – Expanded Memory Status
Reports the status of the currently active Memory Card to the host by printing
a status label.
BJTaa,bb,cc,dd,ee,ff,gg..g – TrueType Font Recall
Recalls a previously stored bitmapped TrueType font for use. See “Expanded
Memory Functions” on page 41.
CCa – Memory Area Select
Selects the memory area for all following Expanded Memory commands.
This command is ignored on T5000r/SL5000r. For SL4M/T4M, CC1 selects
the EMC and CC2 selects the internal flash.
GCaaa – Recall BMP Graphic
Recalls BMP graphic files stored in Expanded Memory. See “Expanded
Memory Functions” on page 41.