User`s manual

Chapter 2

General Commands

(aaaa,bbbb – Reverse Image

Reverse image from black to white and vice versa.

& – Store Form Overlay

Stores a specified label image in the printer’s volatile form overlay memory.

/ – Recall Form Overlay

Recalls the label image from the printer’s formoverlay memory for printing.

0 (zero) – Replace Data (Partial Edit)

Provides the ability to replace a specified area of the previous label with new

data.

*a – Clear Print Job(s) and Memory

Clears individual memory and buffers. When parameter "a" is not specified,

the command aborts all jobs received prior to this command.

NOTE:

This is only supported on SL4M/T4M, and requires a non-standard

Comm. Protocol menu setting.

@ – Off-Line

Signals the printer to go off-line after the completion of a print job.

~aaaa – Cut Job

Cuts labels at a specified interval in a print job.

~Aaaaa – Cut

Specifies the number of labels to print between each cut.

~B – Cut Last

Cuts any printed labels that remain in the printer.

2D10 – PDF417

Command for PDF417 symbology.

2D12 – MicroPDF417

Command for MicroPDF417 symbology.

2D20 – Maxicode

Command for Maxicode symbology.

2D30 – QR Code Mode2

Command for QR Code Mode2 symbology.