User`s manual

Supported General Commands
37
X20 – Font Type
Specifies the 5W x 9L dot matrix font.
X21 – Font Type
Specifies the 17W x 17H dot matrix font.
X22 – Font Type
Specifies the 24W x 24L dot matrix font.
X23 – Font Type
Specifies the 48W x 48L dot matrix font.
X24 – Font Type
Specifies the 48W x 48L dot matrix font.
XBa – Font Type
Specifies the 48W x 48H dot matrix font.
XLa – Font Type
Specifies the 48W x 48H dot matrix font.
Z – Stop Code
Ends all print jobs.
%a – Rotate
Fixed Base Reference Point.
$a,b,c,d – Vector Font
Specifies printing of the unique SATO vector font. The SATO vector font
allows for printing of the Helvetica Bold font in both proportional and fixed-
pitch spacing, with a user-defined size of 50x50 – 999x999 dots.
SATO can also print this font in 10 different font variations.
For SL5000r/T5000r, STGL only supports variation 0 and 8 (Standard and
Italic, Agfa font #92244). For SL4M/T4M, STGL supports all variations.
The other variations (several types of Outlined, Gray, Shadow, and Mirrored
fonts) will print in the standard variation.
$=(data) – Vector Font Data
Data for vector fonts. See “$a,b,c,d – Vector Font” on page 37.
#Ea– Print Darkness
Specifies a new print darkness setting.