User`s manual

Supported General Commands

The following table lists the available character sets:

RFaabbbbn...n – Recall and Print Custom Fonts and Logos

Recalls and prints fonts and logos downloaded with an exclusive tool which

creates custom fonts and logos.

RK – RFID Write

Specifies data to be written into RFID tags.

<ESC>RK1,a,b,D16,c..c – RFID Write

RFID tag Error Ignore. Valid range is from 0-9.

0-Disable (default when value is omitted)

1-Enabled

2-9 Auto retry on tag error.

This command is ignored for STGL. The error handling for all

RFID commands on all supported emulations is set according to

the RFID menu on the front panel. Using the RFID menu, the

user can set the error handling, number of retries, and tag type.

Write Protector Designation. Valid range is from 0 to 1.

0-Fixed (default)

Writing Data Size Recognition Character. Writes data size in

number of characters. Valid data size is 16 characters.

16 or 24

Specification of Writing Data Size. Valid data size is 16 or 24

characters.

c..c

EPC data (fixed at 16 characters). Valid range is 0 to 9 or

A to F only.

Example

<ESC>RK1,0,0,D16,ABCDEF1234567543

Table 3. Character Sets

ID Description

0 CP-858

1 Latin1 ISO8859/1 Latin1

2 Latin2 ISO8859/2 Latin2

3 Latin5 ISO8859/9 Latin5

4 CP-737 DOSGreek

5 CP-855 DOSCyrillic

6 CP-864 DOS Arabic (Not supported)

7 CP-874 Thai (Not supported)

8 CP-850 Multilingual