User`s manual

32
Chapter 2 General Commands
Haaaa – Horizontal Position
From the base reference point, the number of dots horizontally.
IDaa – Store Job ID
Stores the Job ID number.
IP0nn – EPC Code Write Designation
Writes to the RFID tag without moving the paper unless there is printable data
on the same label. SL5000r/T5000r commands follow the syntax for Sato
printers. SL4M/T4M commands follows the syntax for newer printers.
IP1 – EPC Code Read Designation
The UHF RFID read command. SL5000r/T5000r commands follow the syntax
for Sato printers. SL4M/T4M commands follows the syntax for newer printers.
J – Journal Print
Provides the ability to print text line by line.
Kab90cc – Recall Custom Designed Characters
Recalls for printing a custom character stored by the Tabcc(data) command.
Laabb – Character Expansion
Expands characters in both directions up to 12 times (all except raster and
vector fonts).
LAa – Display Language
Selects the display language on the LCD.
LHa – Zero Slash
Sets the Zero Slash option. If a = 0, Zero Slash is disabled. If a = 1, Zero
Slash is enabled.
M – Font Type
Specifies the 13W x 20H dot matrix font.
OA – Font Type
Specifies the OCR-A font dot matrix.
OB – Font Type
Specifies the OCR-B font dot matrix
OL – Online Printer Status Change
Changes the printer status from Offline to Online.