User`s manual

STGL SETUP Submenus

UPC Descenders (SL5000r/T5000r)

Allows the user to force UPC/EAN barcodes to print with or without

descenders.

•

No Change

(default). Use default behaviour, matching Sato.

•

Always

. Force UPC/EAN to print with Descenders.

•

Never

. Force UPC/EAN to print without Descenders.

Ver BaseRefPoint

This setting changes the Vertical base reference point for all subsequent label

jobs. Its effect is identical to the <ESC>A3 Base Reference point command.

•

0 dots

(default)

•

9999 to 9999

Vert. DPI Adjust

NOTE:

Applies to SL4M/T4M printers only.

This option fine adjusts the resolution used to scale the page elements/

coordinates. In cases where the printed label length is incorrect, the vertical

resolution value STGL uses for calculations can be fine adjusted by this menu

between -100 and +100. Negative values result in a lower DPI value and thus

a longer label. Positive values result in a higher DPI value, and thus a shorter

label.

NOTE:

The adjustment does not affect the size of images and downloaded

bitmap fonts.