Operator`s manual
7
SATO M-8400/8 and M-8450
Factory Reset Procedure for M-8450
Are you sure?
No
Important! This procedure will reset all Mode-I and Mode-S settings to Sato
default. Make sure you have a copy of your current settings before performing the
reset.
STEP PROCEDURE
1. Record all current dip switch positions, then place all switches in the Off
position. Place the printers power switch in the Off position.
2. Turn on the power while pressing the Enter key and Left & Right
arrow keys. Release when an audible sound is heard.
Verify display: Mode F Options
3. Press the Right arrow key five (5) times.
Verify display:
4. Press the Enter key once.
Verify display:
5. Press the Right arrow key three (3) times.
Verify display:
6. Press the Enter key once.
Verify display:
7. Press the Right arrow key once.
Verify display:
8. Press the Enter key once.
9. Press the F1 key once.
10. Set the printer power switch to the OFF position.
11. Set the printer power switch to the ON position.
12. Reset user configuration via Mode-I and Mode-S if required. (Refer to
the Operatorīs Manual for instructions.)
13. The printer is now ready to be returned to service.
Mode F Options
Set Machine Type
Mode F Options
Clear Counters
Clear Which Counter
Head
Clear Which Counter
Others
Are you sure?
Yes