Specifications

M-84Pro FAQs
5
press the FEED and LINE keys simultaneously to see "PRINT
DARKNESS" on the display. To move the underline to the desired
setting, press the LINE key. Once the correct setting is underlined
press the FEED key to accept and advance to the next adjustment.
How do I change the print speed?
There are 5 print speed settings (for 203 dpi: from 50 up to 250 mm/
sec, for 305 dpi: from 50 up to 200 mm/sec, for 609 dpi: from 50 up
to 150 mm). To view print speed settings you must go into the User
mode by pressing the LINE key once (the printer display shows
OFFLINE). Next, press the FEED and LINE keys simultaneously to
see "PRINT DARKNESS" on the display. Press FEED again to
advance to the print speed setting. Now press the LINE key to
move the underline to the desired setting. Press FEED to confirm
it. (NOTE: This setting can be overwritten by software).
Does the M-84PRo have a last label repeat feature?
Yes. Press the feed button to print the last label. N.B. This function
can also be disabled by the user.
How do I feed a blank label?
Press the FEED button while the printer is offline. If you have prob-
lems check that the print media has been loaded properly
How can I cancel my print job?
The current print job can be cancelled by using the display: set the
printer offline and press the LINE and FEED buttons simulta-
neously. Next, press the FEED button until the display shows "can-
cel current print job". Use the LINE button to select YES or NO and
FEED to clear.
A command to cancel the print job can also be sent to the driver via
the software. Alternatively, switching the printer off and on again
will also erase all current print jobs.