Installation guide

A P P E N D I X A
A-1
LP 100R PRINTER OPERATING LOCATION REQUIREMENTS
1.1 Operating Location Requirements
Before proceeding with the printer installation, check the following location requirements.
1.1.1 General Site Requirements
To ensure the utmost safety and prevent possible malfunctions of the printer, install it in a location that
meets the following requirements:
1. Since toner spills can occur, do not locate the printer on vinyl chloride flooring or any other material
not resistant to toner.
2. Locate away from objects that may catch fire easily.
3. Locate where there is no possibility of splashing liquids.
4. Locate in an area free from direct sunlight.
5. Locate out of direct air stream of an air conditioner, heater, or ventilator.
6. Locate in a dry place.
7. Locate in a dust-free place.
8. Locate on a stable surface.
9. Locate in a well-ventilated space.
1.1.2 Ventilation Requirements
Locate the printer in a well-ventilated room. A negligible amount of ozone is generated during normal
operation of this printer. An unpleasant odor may, however, be created in poorly ventilated rooms during
extensive printer operations. For a comfortable, healthy, and safe operating environment, it is
recommended that the room be well ventilated.
Be sure to allow a clearance of 6 inches or more in the rear of the printer (at all times) for proper ventilation.