Manualshelf

Installation guide

ManualsBrandsSATO ManualsComputer equipmentLP 100R L
21222324252627282930
INSTALLATION GUIDE
14
Installation of Web Guide/Connector Panel, continued
10. Position the Box Assembly under the suction brake of the printer locating the edge 5 ¾” from the
edge of the front printer cover. See Figure below.
11. Place the roller shaft (Item 2) in the grooves of the Web Guide Assembly (Item 1) and adjust the
spring plungers so that the roller shaft does not pull out of the grooves during printer operation.
Roller Shaft
Web Guide
Assembly