Specifications

English n

‒

: Use only the designated electrical power and voltage

⅐‒ Use the type of power source indicated on the printer. Different

voltage may cause fire or electric shock.

‒

: Connect ground wire

⅐‒ Make sure to connect the ground wire of the printer to the ground

slot. Failure to do so may cause electric shock.

‒

Warning

: Power cord

⅐‒ Do not attempt to damage, break, or modify the power cord. Also,

avoid placing a heavy object on, heating, or pulling the power cord.

This may damage the power cord causing fire and electric shock.

⅐‒ If the power cord becomes damaged in any way (exposed cable

core, breaking of wire), contact your nearest dealer, service center

or the store where you purchased the printer. Continued use of

damaged power cord may cause fire or electric shock.‒

⅐‒ Do not attempt to modify, jerk, knot, sharply bend, or otherwise

abuse the power cord. Continued use of damaged power cord may

cause fire or electric shock.

‒

: In case of drop or damage

⅐‒ If the printer was dropped or damaged, turn off the power

immediately, disconnect the power cord from the power outlet, and

contact your nearest dealer, service center or the store where you

purchased the printer. Continued use of the printer in this condition

may cause fire or electric shock.

‒

: Do not use the printer in abnormal condition

⅐‒ In the case of abnormalities such as smoke or foul odors from the

printer, stop using the printer immediately. Continued use of the

printer in this condition may cause fire or electric shock. Turn off

the power immediately, disconnect the power cord from the power

LM400eクイックガイド070806.indd EIV

2007/08/06 10:44:13