Specifications

Preset data is a means to store data which you wish to use in the formats.
This means that rather than enter large amounts of information every time
you wish to print you can simply recall the data needed by entering a four
digit number or scanning a special barcode containing that number.
Preset Data
Storing Preset Data
Format No
[00]
1
HT200e
Press RCL.
[PRESET]
PRINT STR MODIFY
2
DEL DUMP MASTER
Use < > Keys to select.
STR (Store)
Press ENTR
PRESET F-NO. [..]
3
Enter the number of the
format that you wish data
to be printed in, press
ENTR.
PRESET NO.INPUT*
…. <STORE>
4
Enter the number you
wish to store the data
under, press ENTR.
PROMPT
……………………..
5
You will now go through
the prompts as if you were
printing the label. Enter the
data you wish to store.
Press ENTR after each
one.
PRESET NO.INPUT*
000? <STORE>
6
You must continue through
to this screen otherwise
your data will not be
stored. You will see that
the number has now
advanced automatically to
the next available number.
HT200e will store 300 sets of data in it’s own memory and a further 1,000
on the optional memory card.
Format No
[00]
Changing Stored Data
HT200e
1
Press RCL.
[PRESET]
PRINT STR MODIFY
DEL DUMP MASTER
2
Use < > Keys to select.
MODIFY
Press ENTR
PRESET NO INPUT
---- <MODIFY>
3
Enter the stored number
for the data you wish to
change. Press ENTR.
You will now go through
the format and can
change any of the data.
23