Instruction manual

Section 3: Operation and Configuration
GY412 Operator Manual Page 3-71
3.3 LCD MESSAGE DETAILS (cont’d)
Display Advanced Mode - Protocol code setting
Onscreen
message
Setting the LCD power saving timer.
Use ↑ and ↓ keys to change setting value and
press ENTER.
The setting range is from 00 to 15.
The default setting is “05”.
Operation
button
Button Description
↓↑ Enters setting value.
ENTER Saves the setting and goes to the [SEMBL MODE
AUTO START] screen.
CANCEL Goes to the [PROTOCOL CODE] screen without
saving the setting.
FUNCTION Goes to the [ONLINE MODE] screen without sav-
ing the setting.
Display Advanced Mode - LCD power saving setting
Onscreen
message
Setting the LCD power saving timer.
Use ↑ and ↓ keys to change setting value and
press ENTER.
The setting range is from 00 to 15.
The default setting is “05”.
Operation
button
Button Description
↓↑ Enters setting value.
ENTER Saves the setting and goes to the [SEMBL MODE
AUTO START] screen.
CANCEL Goes to the [PROTOCOL CODE] screen without
saving the setting.
FUNCTION Goes to the [ONLINE MODE] screen without sav-
ing the setting.
STANDARD
NON-STANDARD
PROTOCOL CODE
05
LCD POWER SAVING